5-axis Fiber Laser Cutter

5-axis Fiber Laser Cutter

Brand:ROCLAS
Model:RCL3015
Working Size:1500mm*3000mm(5*10FT)
Laser Type:5-axis fiber laser cutter
Customization:Yes
Laser Power:3K~20K
Warranty:12-60Months
Application:Metal cutting
Add To Inquiry
Send Inquiry
Description
Technical Parameters

Roclas Laser Technology is one of the leading manufacturers and suppliers of 5-axis fiber laser cutter in China, featured by quality products and good price. Please rest assured to buy discount 5-axis fiber laser cutter for sale here from our factory.

 

Introduction to 5-axis fiber laser cutter

 

The five-axis fiber laser cutter is a high-precision, high-flexibility laser processing centre built for metal fabrication. Its defining feature is a five-axis linkage CNC system that governs the spatial position and the attitude angle of the cutting head at the same time, so three-dimensional contours on complex workpieces are produced without repositioning the part.

product-1200-803

 

On model RCL3015 the working envelope is 3000 x 1500 mm (5 x 10 ft). Two rotary axes, A and B, are added to the conventional X, Y and Z travel: the nozzle tilts and rotates while it tracks the toolpath, and the beam stays square to the surface throughout the pass. Bevelled edges, holes on inclined or curved walls, and trimmed stamped or hydroformed shells are therefore finished in a single clamping, work that previously required a milling centre or several fixtures.

Typical installations are job shops and OEM workshops in automotive, aerospace, rail, HVAC, agricultural machinery and metal furniture, where batch sizes vary and the mix of flat sheet, tube and formed parts keeps changing. Mild steel, stainless steel, aluminium, copper and alloy grades all run on the same table, which makes the platform a flexible alternative to a dedicated flatbed plus a separate tube station.

 

Core advantages

 

 

Seven points explain why buyers move from a three-axis flatbed to this platform.

 

1. Simultaneous five-axis interpolation:

All five axes travel together instead of being indexed one after another. The result is a constant kerf on slopes and a uniform edge where the surface changes angle, with no stair-stepping or recast ridges.

2. Weld-ready bevels in one pass:

Chamfers and V or Y preparations from 0 to 45 degrees are generated by tilting the head rather than tilting the workpiece. Milling, grinding and a second fixture disappear from the routing.

3. More features per setup:
Contours, holes, slots and countersinks on a three-dimensional component are nested into one program and one clamping, which shortens handling time and removes the error that comes from re-datuming.
4. Plate, tube, profile and shell on one asset:
The rotary axes allow square, rectangular and round hollow sections as well as stamped shells to be severed and perforated, so one investment covers work that would otherwise need two machines.
5. Wider material window:
Beyond carbon and stainless steel, the source handles aluminium, copper and brass, titanium and nickel-based alloys; with suitable optics and assist gas it also processes acrylic, PC, ABS, wood, composites, stone and leather.
6. Better yield on expensive stock:
Dynamic nesting, common-line severing and near-net blanks reduce offcut, a decisive advantage when the sheet is aluminium, copper or a nickel alloy.
7. Built for unattended shifts:
Exchange tables, robot loading and remote monitoring can be integrated; the fiber source converts electrical energy at high efficiency and consumes little assist gas on thin gauge.

product-1200-803

 

Performance and applications

 

Materials processed
 

Metallic workpieces form the core workload of this machine.

Carbon steel and stainless steel:

the two most common grades; the beam penetrates them easily and leaves a clean, almost burr-free kerf.

Aluminium alloys:

lightweight, high-strength properties are preserved, and the edge quality supports downstream bending and welding.

Copper and brass:

high reflectivity and thermal load call for dedicated assist gas and tuned parameters, which the control recipe library provides.

Titanium and nickel-based alloys:

processed with inert gas to protect the cut face and limit oxidation.

 

Non-metallic options extend the range for design-led and functional parts.

Plastics:

acrylic (plexiglass), PC and ABS, for signage, covers and prototypes.

Wood:

for decorative panels, patterns and mock-ups.

Composite materials:

carbon fibre and glass fibre sheets, cut with extraction in place.

Stone and leather:

for interior, furniture and lifestyle products.

 

Achievable results

 

Production speed:

thin gauge runs at high feed rates, and parts that used to need several operations are completed in a single cycle, shortening the production cycle.

01

Complex geometry:

curved surfaces, irregular outlines and sculpted shapes that conventional machine tools find difficult are produced in one continuous motion.

02

Environmentally light:

a non-contact process imposes no mechanical stress on the workpiece, so deformation is avoided and fume and waste stay low.

03

Dimensional accuracy:

repeatability of plus or minus 0.02 mm and positioning of plus or minus 0.03 mm per 1000 mm, enough for tight assembly fits and jig-free welding.

04

Edge quality:

the kerf is smooth with almost no burr, so grinding, filing and polishing steps are greatly reduced.

05

 

Process capabilities

Bevel and chamfer severing up to 45 degrees, including weld preparation.

3D trimming of stamped, hydroformed and cast shells.

Hole making on inclined, cylindrical and curved surfaces.

Tube, pipe and open profile processing with the rotary axis.

Fine contour and narrow slot work on thin gauge sheet.

Nesting and common-line severing for material savings.

 

 

 

Where it is used

Automotive and EV:

battery housings, chassis brackets, door rings and hot-stamped blanks.

Aerospace:

cowlings, ribs, clamps and brackets in aluminium and titanium.

HVAC and architectural metal:

damper blades, louver frames, duct components and laser safety enclosure panels.

Rail and shipbuilding:

interior panels, structural plates and ventilation parts.

Agricultural and construction machinery:

guards, covers, wear plates and frames.

Fitness, medical and kitchen equipment:

housings, frames and stainless worktops.

Job shops and prototyping:

mixed batches, short runs and design iterations.

 

 

Core configuration, quality, manufacturing and service

 

Core components

 

 

 

1. Fiber laser source: the energy core of the machine. Superior electro-optical conversion, high beam quality and stable, reliable output provide the density needed for high-precision 3D work.

 

2. CNC control system: the coordination hub. It drives the X, Y and Z linear axes together with the A and B rotary axes, plans the toolpath intelligently, feeds back motion status in real time and automates process management.

 

3.Laser cutting head:the execution unit. It integrates the A and B rotation and Z lifting, uses a hollow optical path for stable delivery, corrects surface height automatically and carries an anti-collision structure that protects accuracy and service life.

product-1200-803
product-1200-803

4. Servo motors and drive system: each axis has its own servo, responding precisely to CNC commands. High-precision reducers and transmission parts guarantee fast positioning and accurate alignment.

 

5. Delivery fiber: the transmission carrier. Its flexibility and low loss keep energy and beam quality stable from source to head.

 

6.Focusing optics: collimating and focusing lenses set the spot size inside the head; focal length and coating directly determine kerf width and edge appearance.

7.Gantry and machine bed:

 

 

a stress-relieved welded frame with machined mounting faces and a blade table for heavy sheet; the damping design holds accuracy during rapid acceleration.

8. Cooling and fume extraction:

 

 

a dual-circuit chiller stabilises the source and the optics, while a dust and fume filter keeps the workshop air clean.

9. Safety package:

 

 

enclosure with interlocked doors, light curtain, emergency stop and CE-compliant guarding around the working zone.

 

 

 

Machine configuration

Machine model

RCL3015

Working size

3000*1500MM(5*10FT)

Working Table

Blade Table

Laser Power

3K-20K

Laser Source

MAX(EMPOWER/RAYCUS/IPG)

Laser Head

RAYTOOLS(BOCI)

Control System

Lynuc/Syntec/Simens

Max. Rapid Travel Rate

80000mm/min

X/Y axis Position accuracy

±0.03mm/1000mm

Working environment

Temp:0-40℃,humidity:≤80%, No condensation

Working Voltage

380V 60/50HZ 3PH

Auxiliary Gas

Air Oxygen, Nitrogen

Water Chiller

S&A

 

 

 

Common consumables

 

  • Optical components: protective lens, focusing lens, collimating lens.
  • Cutting head parts: oxygen, nitrogen, argon, compressed air.
  • Assist gases: Oxygen, nitrogen, argon, compressed air.
  • Cooling circuit: deionized water, coolant, filter, water pipes.
  • Filtration: fume filter and filter element.
  • Transmission and lubrication: guide rail grease, lubricating oil, seals.
  • Electrical parts: laser power module, control card, sensors.
  • Wear parts: ceramic ring, sensor probe, nozzle holder.
  • Accessories: gas pressure reducing valve, tubing, sealing rings, screws, cables.
  • Others:  clamps, safety glasses, cleaning agents, desiccants.

 

 

 

Optional equipment

product-1200-900

Air compressor:

supplies high-pressure, clean and stable assist gas for severing, purging and protection.

Nitrogen generator:

delivers high-purity nitrogen for oxidation-free processing of stainless steel and aluminium.

product-1200-799
product-1200-800

Oxygen generator:

provides high-purity oxygen for fast, efficient work on carbon steel.

 

 

Quality control and manufacturing
  •   Incoming verification:

    laser source, cutting head, servo, reducer and optical parts are tested against specification before assembly.

  • Frame machining:

    welded structures are annealed, then milled on a large gantry machining centre to keep mounting faces flat and square.

  • Geometric calibration:

    squareness, straightness and repeatability are checked with a laser interferometer and ballbar before the machine is released.

  • Running-in and sample work:

    every unit completes a continuous running test and severs reference samples in carbon steel, stainless and aluminium.

  • Packing and traceability:

    export-grade protection with plywood case, plus a serial-linked inspection record supplied with the machine.

 

Service and warranty

 

 7 x 24 h online service. Contact us at any time for remote diagnosis and solutions.

  Each machine comes with an operation manual and operation videos.

  12-month to 36-month warranty, with free maintenance during the warranty period.

(Human error, violation of the operating manual, and malfunctions caused by irresistible natural phenomena are not covered.)

  On-site installation, commissioning and operator training by our engineers.

  Spare parts held in stock, with remote guidance for replacement and adjustment.
 Sample cutting service before an order is placed,Safeguarding your metal cutting success.

 A reliable and valuable warranty gives your cutting process and your business a promise of long-term success.

 

 

FAQ

 

Which materials can the RCL3015 process?

Carbon steel, stainless steel, aluminium and its alloys, copper and brass, titanium and nickel-based alloys. Acrylic, PC, ABS, wood, composites, stone and leather are also possible with the right optics and assist gas.

What thicknesses are practical?

Capacity follows the installed source, from 3 kW to 20 kW. Thin gauge runs at high speed with excellent edge quality; thicker carbon steel is normally processed with oxygen, while stainless and aluminium are handled with nitrogen. Send the grade and thickness and we will prepare a sample.

How does a five-axis machine differ from a three-axis flatbed?

A flatbed keeps the head vertical, so only straight-walled profiles are possible. Here the A and B axes tilt and rotate the nozzle, allowing bevelled edges, 3D contours and work on formed or tubular parts without a second setup.

Can it produce weld-ready bevels?

Yes. Chamfers up to 45 degrees are generated in one pass, which removes the milling and grinding steps that usually follow a straight cut.

What sizes and powers are available?

The standard envelope is 3000 x 1500 mm (5 x 10 ft). Other working sizes are built to order. Sources range from 3 kW to 20 kW (MAX, EMPOWER, RAYCUS or IPG), with RAYTOOLS or BOCI heads and Lynuc, Syntec or Siemens controls.

What are the site requirements?

380 V, 50 or 60 Hz, three phase (other voltages configured on request), ambient 0 to 40 degrees Celsius, humidity up to 80 percent without condensation, clean dry compressed air or bottled nitrogen and oxygen, a level foundation and a fume exhaust route.

What is the lead time and how is it shipped?

Lead time is confirmed with each offer and depends on the chosen configuration. Machines leave the factory in seaworthy plywood cases, by FCL or LCL, on FOB, CIF or DDP terms.

What support is provided after delivery?

Engineers handle installation and commissioning, train your operators, and remain reachable through 7 x 24 h online service. Consumables and spare parts are stocked for quick dispatch

Which running costs should be budgeted?

Protective lenses, nozzles, ceramic rings, filter elements, assist gas and electricity. The fiber source is highly efficient, and edge quality is good enough to reduce downstream grinding.

Can it be automated or linked to a production line?

Yes. Exchange tables, robot loading, auto nesting and remote monitoring can be integrated, and data can be shared with a workshop management system.

Is a trial cut possible before purchase?

Yes. Send the material grade, thickness and drawing, and we will process a sample and return photos, measurements and a time study.

 

 

 

 

Hot Tags: 5-axis fiber laser cutter, China 5-axis fiber laser cutter manufacturers, suppliers, factory, 5 axis Laser Machine For Metal Cutting, sheet metal fiber laser cutting machine, 5 axis Cnc Laser Cutting Machine, 5 axis Fiber Laser Cutter, used fiber laser cutting machine, 5 axis fiber laser machine

Send Inquiry
Send Inquiry