Whole Cover Moving Table Fiber Laser Cutting Machine

Whole Cover Moving Table Fiber Laser Cutting Machine

Brand:ROCLAS
Model:RCL3015
Working Size:1500mm*3000mm(5*10FT)
Laser Type:Fiber Laser cutting machine
Customization:Yes
Laser Power:3K~20K/etc.
Warranty:12-60Months
Application:Metal cutting
Feature: Full cover/Exchange table
Add To Inquiry
Send Inquiry
Description
Technical Parameters

Roclas Laser Technology is one of the leading manufacturers and suppliers of whole cover moving table fiber laser cutting machine in China, featured by quality products and good price. Please rest assured to buy discount whole cover moving table fiber laser cutting machine for sale here from our factory.

 

product-1200-300

 

Product Definition

 

product-1200-800
product-1200-800
product-1200-800
product-1200-800

As a Chinese manufacturer with years of experience in metal-cutting equipment, Roclas supplies the whole cover exchange table fiber laser cutter as a complete, production-ready machine that pairs dependable build quality with competitive factory pricing.

 

The unit is built around two structural decisions: a sealed working envelope and a two-position sheet table. The sealed envelope encloses the cutting zone, holding back scattered laser light, fume, sparks and process noise, so the operator works safely and the workshop stays clean. The paired table separates cutting from handling - one bed sits under the cutting head while the other waits outside for unloading and reloading, and the two swap in seconds.

 

The cutting motion comes from a heavy gantry: the beam tracks along the machine bed in X, the head slides across the crossbeam in Y, and the sheet stays locked in place throughout. For large, heavy plate that is awkward to reposition, this arrangement keeps accuracy steady and output continuous. Beam energy travels through fiber and is focused to a tight spot that melts or vaporizes the metal, producing clean contours and precise holes.

 

Product Series

 

 The whole cover range is assembled from selectable modules, so a single platform covers many workshop profiles:

 

Power steps:

3kW, 6kW and 12kW form the regular line-up; 20kW can be specified when thick sections are routine.

Bed dimensions:

1500 × 3000mm (5 × 10ft) comes as standard; alternative footprints are built against your sheet size.

Table layout:

two-position exchange bed as the default; a single-bed variant suits shops with light, irregular orders.

Beam source:

MAX units, chosen from Empower, Raycus or IPG modules.

Head assembly:

Raytools supplied as standard, with Boci as a second option.

Guard style:

complete enclosure standard, partial enclosure on request.

Products Description

 

Four questions usually settle the configuration:
 
 
 

How thick is your stock?

Under 4mm is comfortable on 3kW; 4–10mm generally matches 6kW; 10–20mm points to 12kW; heavier sections call for 20kW. Treat these as orientation values - actual reach varies with alloy and assist gas.

 

 

How busy is the line?

Where the machine runs most of the day, the two-position bed pays for itself by removing waiting time; where jobs are occasional, a single bed keeps the investment lean.

 
 

How large is your sheet?

A 5 × 10ft footprint handles standard mill sizes; anything bigger is a custom build.

 
 

Which metal and finish?

Carbon steel cuts fast on oxygen or air; stainless and aluminum need nitrogen for clean, bright edges.

 

 

 

Core Advantages

 

 

Safety built into the frame.

A closed working envelope keeps stray beam energy, fume and sparks inside, while also softening the noise of high-speed cutting - easier compliance, a calmer floor.

 
 

Gantry engineered for mass.

The crossbeam rides a rigid bed at speed without losing composure, so very large and very heavy sheets remain supported and square.

 
 

Repeatable on long parts.

Because the sheet is clamped and never shifted mid-cut, dimensional consistency holds from the first corner to the last on oversized blanks.

 
 

Throughput without idle time.

The paired beds overlap load, cut and unload, so the laser keeps working while the next sheet is staged.

 
 

Handles the loads others refuse.

Thick, cumbersome stock that cannot be wrestled onto a light table sits comfortably on this bed.

 
 

Lean running cost.

Fiber delivery converts power efficiently, draws modest current and needs no consumables beyond assist gas; a tight kerf and small heat zone keep distortion low.

 

 

 

Performance & Applications

 

Performance highlights
 

Rapid traverse tops out at 80,000mm/min

 

Power envelope spans 3kW to 20kW

 

Nominal bed 1500 × 3000mm

 

Operations cover contour cutting, piercing and grooving

 

Works carbon steel, stainless steel, alloy steel and aluminum alloy

 

Assist media: air, oxygen, nitrogen at 0.6–0.8MPa

 

Site conditions: 0–40°C, ≤80% humidity, no condensation

 

 

Applied industries
 

 

Builders of heavy machinery, construction plant and mining rigs, cutting large frames and thick structural members.

Shipyards, offshore platform contractors and heavy steel fabricators.

Wind-turbine, electrical-equipment and pressure-vessel producers.

Aerospace and defense supply chains needing tight-tolerance blanks.

High-end sheet-metal job shops and large metal stockholding centers.

Plants where accuracy, rigidity and load capacity are non-negotiable.

product-1200-450

 

 

 

Core Configuration, Quality, Manufacturing & Service

 

Help FAQ
Common Problem
  • Key configuration

    • Beam source: MAX platform (Empower, Raycus or IPG), rated 3kW–20kW.
    • Cooling: S&A dual-circuit chiller sized to the source, with over-temperature warning.
    • Head: Raytools, or Boci if preferred.
    • Control: Raytools controller with its matching software.
    • Bed: blade-type support inside the enclosure, reached through openable guard doors.
    • Gas: air, oxygen or nitrogen at 0.6–0.8MPa.
    • Mains: 220V / 380V, 50/60Hz, three phase.
  • Quality

    Before dispatch each machine runs through dynamic test cycles and calibration - gantry travel, rail alignment and rack lash - and carries CE and FDA marking for export.

  • Manufacturing

    A welded heavy-section base and stiffened crossbeam carry the cutting assembly, matched to precision rack-and-pinion drive and a full metal guard - the structural basis for cutting oversize plate accurately.

 

modular-1
Service

Warranty spanning 12–60 months by configuration.

Remote diagnostics and technical guidance for the machine's service life.

On-site or online operator training, plus spare-parts support.

Export-grade packing and worldwide freight arrangements.

product-1200-803 

product-1200-799

product-1200-600

product-1200-600

 

 

 

Technical specifications

 

Item

Value

Machine model

RCL3015

Working size

3000 × 1500mm (customized)

Working table

Blade table

Laser power

3K–12K/etc.

Laser source

MAX (EMPOWER/RAYCUS/IPG)

Laser head

RAYTOOLS (BOCI)

Control system

RAYTOOLS

Max. rapid travel rate

80000mm/min

Material

Carbon steel, stainless steel, alloy steel, etc.

Working environment

Temp 0–40℃, humidity ≤80%, no condensation

Working voltage

220V / 380V, 60/50HZ, 3PH

Auxiliary gas

Air, oxygen, nitrogen

Air pressure

0.6–0.8MPa

Full cover

Yes

 

 

FAQ

 

 

 

278

01.Why does the gantry shake at high feed rates, and how is it fixed?

Vibration usually traces back to the foundation or the rail setting. Confirm the base is solid concrete, then check rail parallelism and levelness, and verify rack-and-pinion lash stays inside the factory tolerance band. Re-tune drive gain on the servo axis. Each machine is dynamically tested and calibrated before shipping; when long service shifts the settings, our engineers can walk you through recalibration.

02.Does the closed cabinet slow down loading or maintenance?

No. Guard doors open on both positions of the bed, and the exchange table brings the working surface out where the operator stands, so sheets go in and out quickly and service access stays straightforward.

03.How do I know which laser power suits my plate?

Start from your most common thickness and alloy. Thin gauges favour 3kW, mid-sections 6kW, heavier plate 12kW, and production on thick stock 20kW. Send us the material grade and thickness band and we will confirm the matching build.

04.What advantage does the exchange table bring over a single bed?

While the laser cuts one sheet, the second bed is free for unloading finished parts and staging the next blank. The swap is quick, so crane time and manual handling no longer hold up the cutting cycle.

05.What mains supply is needed on site?

The machine is wired for 220V or 380V, 50/60Hz, three phase. Tell us your plant voltage at the enquiry stage so the correct electrical build is prepared.

06.Can bed size and power be changed to fit my workshop?

Yes. The 5 × 10ft format is the reference size, other footprints are built to order, and power ratings from 3kW to 20kW are matched to the work you handle.

 

 

 

 

Hot Tags: whole cover moving table fiber laser cutting machine, China whole cover moving table fiber laser cutting machine manufacturers, suppliers, factory, Full Cover Exchangable Table Fiber Laser Cutting Machine, fiber laser cnc, Cover Exchange Table Metal Cutting Machine, Metal Cutter Fiber Laser Cutting Machine, Exchange Table Fiber Laser Cutting Machine, fiber optic cutting machine

Send Inquiry
Send Inquiry