Spanish Integrated Sheet and Tube Laser Cutting Machine

Aug 03, 2026

Leave a message

Client Basic Information, Industry, Application Scenarios & Purchasing Requirements
Client Country:Spain
Industry:Metal & Steel Structure Processing Factory
Application Scenarios:
The factory operates in a single-story workshop, undertaking simultaneous processing of flat sheet metal and metal tubes. Finished workpieces are supplied to local manufacturers in construction, fitness equipment and agricultural machinery sectors. Flat sheets and pipes can be blanked in one batch for unified production.
info-1262-844
Core Procurement Requirements
Adopt one machine to complete both flat sheet and tube cutting, avoiding separate investment in independent sheet laser cutter and dedicated

tube cutting machine.

info-2400-850
Equipped with a 3000W fiber laser source, capable of processing carbon steel, stainless steel and galvanized sheets of conventional thicknesses.
Match Spain's industrial 3-phase 380V/50Hz power grid; the whole machine is certified with EU CE standard.

info-554-139

Sheet working area: 3000×1500mm; supports 6m long tubes with max round tube diameter up to 240mm.
·High cutting precision, burr-free cross-section with minimal slag to reduce manual polishing workload.
·Medium budget, low long-term consumable cost.

Support batch programming to eliminate repeated parameter adjustment during frequent product changeover.

info-1262-844
Client's Existing Production Pain Points

(1)Excessive equipment investment & limited workshop space The client previously owned two separate devices: a flat sheet laser cutter and a plasma tube cutting machine. Dual equipment occupies double floor space and doubles procurement & maintenance costs. The tube cutter stays idle when tube orders drop, resulting in low capital utilization rate.


(2)Low productivity & tight delivery lead time Sheets and tubes are processed on two individual machines, requiring frequent material transfer and prolonging the production cycle of each batch, making it impossible to accept rush orders. Poor material adaptability: The old equipment tends to burn edges when cutting stainless steel and thin plates with unstable cutting results, so related workpieces have to be outsourced, raising external processing costs and extending delivery cycles.
(3)Cumbersome maintenance & high daily running cost Two machines are equipped with independent control systems and two sets of spare parts, requiring abundant spare part inventory and time-consuming fault diagnosis. Plasma consumables such as electrodes and nozzles wear out quickly, leading to high monthly expenditure on consumables.

Recommended Product:
Key Advantages & Recommendation Reasons

(1)Dual-purpose design to save workshop space and procurement cost Integrated sheet & tube processing replaces two standalone machines, cutting floor occupancy by 50% and lowering initial investment. During off-peak tube order periods, the machine can fully operate on sheet processing to avoid idle loss of equipment.
(2)3000W laser power perfectly matches the client's material thickness demand Max cutting capacity: 16mm carbon steel, 8mm stainless steel, 6mm aluminum alloy, fully covering all conventional thicknesses of the client's orders. Thin plates can be cut at high speed without edge burning, while thick plates deliver smooth cutting sections.

(3)Ultra-high cutting precision greatly reduces polishing labor Repetitive positioning accuracy: ±0.02mm. Laser cutting produces smooth slags-free kerf. Holes and intersecting lines on tubes can be formed in one pass, cutting polishing labor input by 70%.

(4)Fully compliant with EU industrial power conditions in Spain The whole machine holds CE safety certification with wide-voltage 3-phase 380V/50Hz input. Stable laser output is maintained under ±10% grid voltage fluctuation, perfectly adapting to local factory power supply in Spain.

(5)Low maintenance cost with widely compatible standard spare parts Configured with MAX laser source, Raytools cutting head and LEADSHINE servo motors. Standard universal spare parts are stocked in European warehouses. The fiber laser source requires no daily maintenance, cutting monthly consumable costs by 60% compared with plasma cutting equipment.

info-1262-844
info-1262-844

Core Technical Parameters of RCL3015T-3000W Combined Sheet & Tube Laser Cutter

Item

Specification

 

Laser Power

3000W MAX fiber laser source

 

Effective Sheet Working Size

3000mm (X-axis) × 1500mm (Y-axis)

Standard Tube Processing Length

6m; compatible with round & square tubes

 

Processable Materials

Carbon steel, stainless steel, galvanized sheet, aluminum alloy

 

Positioning Accuracy

±0.03mm

 

Repetitive Positioning Accuracy

±0.02mm

 

Drive System

LEADSHINE servo motors, dual rack & pinion transmission

 

CNC System

Raytools industrial intelligent cutting system, supports DXF & AI drawing import

 

Cutting Head

Raytools auto-focus laser cutting head

 

Input Power Supply

3-phase AC 380V 50Hz

 

Tube Clamping Structure

Front & rear dual pneumatic self-centering chucks

 

 

 

FAQ
Q1: Can this 3000W sheet & tube integrated laser cutter process sheets and tubes at the same time?
A1: No, it is a switchable all-in-one machine. The tube chuck retracts and will not occupy the worktable during sheet cutting. It is the ideal option for factories focusing on sheet processing with tube processing as auxiliary business, covering two types of workpieces without purchasing two separate machines.
Q2: Can the standard 6m tube processing length be extended?
A2: The standard model supports 6m tubes. Customized 3m or 9m extended tube racks are available. The 9m customized version is suitable for long tube processing of large construction machinery.
Q3: Will the machine be supplied with EU CE certification documents? Any customs clearance risks?
A3: Complete CE and RoHS certificates are provided together with English certification papers and machine nameplates. There will be no obstacles during customs clearance at Spanish ports, and the machine can complete local industrial equipment filing directly.
Q4: What regular consumables are needed? Can they be purchased locally in Spain?
A4: Consumables include cutting nozzles, protective lenses, cooling liquid and fiber laser protective sleeves. All are standard universal parts available at local hardware and laser accessory stores in Spain. We can also deliver bulk consumables along with the machine.
Q5: Is it capable of cutting special-shaped tubes?
A5: Yes, but system modification is required.
6. Alternative Graded Product Solutions
Scheme 1: High-efficiency Separate Equipment Set
Model Combination: RCL3015-3000W Flat Sheet Laser Cutter + RCL2400-3000W Dedicated Tube Cutter Applicable Customers: Factories with balanced daily sheet and tube order volume requiring parallel double-line production. Two machines can run simultaneously, doubling the total production capacity compared with the all-in-one model, suitable for medium-scale mass processing manufacturers.

1

2png 1

 

 

Send Inquiry
Send Inquiry