Bending Machine Working Principle

Jan 18, 2026

Leave a message

Power System Drive
The power source of a bending machine usually falls into three types:
• Mechanical Transmission: Driven by a motor through mechanical components such as flywheels, gears, and crankshafts, converting rotational motion into linear reciprocating motion of the slider. This structure is suitable for small to medium-sized machines, with low cost and simple maintenance, but processing accuracy is greatly affected by mechanical gaps.
• Hydraulic Transmission: Currently the mainstream technology, it generates high-pressure oil through a hydraulic pump, which enters the hydraulic cylinder under the control of a servo valve, driving the slider to press down at a stable, low speed. Hydraulic systems can achieve stepless pressure regulation (e.g., 10-30MPa) and stroke control (accuracy ±0.1mm), suitable for processing high-strength steel plates (e.g., Q345) or complex bending parts.
• Electric Servo Control: Uses a motor + screw transmission, with a CNC system that adjusts the slider position and pressure in real time. It has a faster response speed (≤0.1 seconds), suitable for high-precision, batch-oriented flexible production scenarios, such as automotive parts processing.

Cooperation of the Die System
The die system of a bending machine consists of an upper die (punch) and a lower die (V-groove). Its design directly affects processing accuracy and sheet deformation:
• Upper Die Types: Includes straight, sickle, and curved styles, used for different bending angles (e.g., 90°, 120°) and springback compensation. For example, when processing 304 stainless steel, a sharp upper die with an R-angle of 0.5mm should be selected to reduce tearing.
• Lower Die V-Groove: The groove width is usually 6-12 times the sheet thickness (e.g., for 2mm steel plates, the groove width should be 12-24mm). If the groove is too narrow, the sheet will be compressed and deformed on both sides; if too wide, a clear bend cannot be formed.
• Die Compatibility: High-quality machines support quick die changes (e.g., within 30 seconds), suitable for multiple die types and adaptable to multi-variety, small-batch production.

Leveling Mechanism and Angle Control
After the initial bending of the sheet, the leveling mechanism (such as a hydraulic push rod or mechanical pressing block) applies secondary pressure to the bent edges, eliminating the "springback" caused by elastic deformation and ensuring final angle accuracy. For example, when producing a 45° bend, the leveling mechanism may adjust the angle to 43°-44°, which then reaches the target angle after springback. Modern bending machines achieve automated angle control via CNC systems. After inputting parameters such as sheet thickness, material modulus of elasticity (e.g., carbon steel 210 GPa), and lower die groove width, the system automatically calculates compensation values and outputs pulse signals to control slider pressure.

Send Inquiry
Send Inquiry