Core maintenance points
Maintenance of the cooling system: This is a top priority to ensure the stable operation of the laser.
Water quality and circulation: Replace the circulating cooling water once a month and replace the filter element to ensure the purity of the cooling water. Cloudy water can reduce cooling efficiency and even damage the laser.
Antifreeze and anti-condensation: The ambient temperature should not be lower than 5°C, antifreeze measures should be taken in winter, and antifreeze can be added if necessary. At the same time, it is necessary to pay close attention to whether there is "condensation" (condensation) in the cooling water pipeline, and once found, the machine should be stopped immediately, and the water should be naturally dried and the internal optics should be checked before restarting.
Equipment Cleaning and Inspection: Regularly clean the chiller's dust screen and condenser to ensure smooth ventilation. Regularly check the water pipe joints for water leakage and tighten them in time.
Cleaning and calibration of optical components: The optical system is at the heart of laser production and must be kept clean.
Regular inspection: After working for about two weeks or a cycle, key components in the optical path (such as YAG rods, dielectric diaphragms, lens protective glass, etc.) should be inspected to ensure that there is no dust and mildew.
Beam quality inspection: Regularly check the laser output spot with laser dimming paper. If the spot is found to be uneven or the energy drops, professionals need to adjust the resonator cavity to ensure the beam quality.
Cleaning specifications: When cleaning the optical components and optical path protection cover, it is essential to use special cleaners and lens paper to avoid scratching the precision lenses.
Equipment cleaning and environmental management: A good working environment is the basis for the stable operation of equipment.
Daily cleaning: Before and after each work, clean and soft non-woven fabrics should be used to wipe the equipment shell, welding head, observation window and other surfaces to remove dust and impurities.
Environmental requirements: The equipment should be placed in a dry, well-ventilated environment with suitable temperature (15°C~30°C is recommended), avoiding direct sunlight and high humidity. Keep the inside of the control cabinet clean to prevent dust accumulation.
Regular calibration and replacement of wearing parts: Preventive maintenance is key to avoiding unexpected breakdowns.
Parameter calibration: Regularly calibrate key parameters such as laser power, welding speed, and focal length to ensure the stability of welding quality.
Replace wearing parts: Regularly replace wearable accessories such as laser lamps, lens protection lenses, sealing rings, and conductive nozzles according to the frequency of use and environment.
Safe operation and professional training: Safety is the first prerequisite.
Professional operation: The equipment must be operated by specially trained personnel, and it is strictly forbidden for non-professionals to use or maintain it without authorization.
Safety protection: special laser protective glasses must be worn during operation to ensure that there are complete safety protection measures in the work area to prevent laser damage to personnel.
Maintenance records: Record the time, content and problems found in detail for each maintenance, which is convenient for tracking equipment status and timely detection of potential hidden dangers.
