The output wavelength of the laser fiber welding machine ranges from 1064nm to 1080nm, which falls within the infrared light spectrum. Therefore, the laser welding machine has relatively low environmental temperature requirements and can operate outdoors; at the same time, it effectively suppresses the effects of ultraviolet radiation and thermal radiation; moreover, since it operates in the infrared spectrum, it does not produce electromagnetic interference.
The laser system that uses a semiconductor-pumped solid-state laser as the light source has advantages such as small size, light weight, and long lifespan; a semiconductor-pumped solid-state laser also does not require coolant to maintain its operating temperature (i.e., no water cooling), thereby avoiding damage and reduced lifespan caused by high temperatures.
The fiber transmission system has a simple structure, small size, and is easy to carry and use; additionally, this system can be flexibly configured to operate in spot welding or continuous wave mode (i.e., dual-pulse mode).
Due to the characteristics of the fiber transmission system, it is highly suitable for various types of fiber connector joining operations.
Different welding effects and welding depths (up to 20μm) can be achieved by adjusting the power.
Different welding angles can be achieved by adjusting the beam direction.
Different thicknesses of plate welding operations can be performed by adjusting the output power (minimum thickness as low as 0.1mm).
The alignment and alignment speed of the plates can be controlled by changing the beam incident angle (minimum speed as low as 1°/s).
Different welding depths and welding speeds can be achieved by changing the beam intensity (minimum welding depth as low as 0.2mm).
